TILE, LAMINATE &

MELAMINE PAINT

TOP COAT AND PRIMER IN ONE

 

Can be brushed , rolled or sprayed, straight on prepared tiles, laminate and melamine.  Use a fine bristle brush. If using a roller a short nap roller like a mohair is best.

Mineral turpentine for clean up and thinning.

Dries in 2 hours and recoat in 2 - 4 hours depending weather conditions. Full curing time at least 1 - 3 weeks.

Sand surfaces with 240 320 grit paper and clean very well.

If painting floors a anti slip grit must be used.

Bench tops should be covered with towels for a least 3 weeks while paint is curing and avoid knocking surface with hard or sharp objects.

Make sure you stir the paint well and check for settling on the bottom of the can before painting.

If you're going to spray, you will need to thin the paint out about 5-10% mineral turps or more depending on your spray unit.

Do not paint if the temperature is less then 12 degrees C.