TURPS BASED PRIMERS & UNDERCOATS

 

 

ALL PURPOSE UNDERCOAT

 

A HEAVY BODIED TURPS BASED FORMULA USING A COMBINATION OF ALKYD RESINS AND LINSEED OILS

 

APPROXIMATELY 24 HOURS DRYING TIME DEPENDING ON HUMIDITY AND VENTILATION

 

VERY GOOD ADHESION IS OBTAINABLE FROM OLD SURFACES

 

CAN BE OVERCOATED WITH WATER BASED PAINTS

 

SUITABLE FOR MOST SURFACES

 

FOR EXTERIOR BARE TIMBER AT LEAST ONE COAT OF TIMBER PRIMER IS RECOMMENDED

 

DEPENDING ON CONDITION OF TIMBER COVERAGE IS 10-12 SQUARE METRES PER LITRE.

 

APPLICATION BY BRUSH, ROLLER, OR SPRAY

 

IF SPRAYING, THINNING WITH TURPS MAY BE NECESSARY

 

ON ROUGH TIMBER BRUSHING IS THE BEST METHOD OF APPLICATION

 

AVAILABLE IN 500ML,1 2,  4, AND 10 LITRE CANS

 

WASHES UP IN MINERAL TURPS

 

DOES NOT CONTAIN  ANY LEAD OR MERCURY BASED PRODUCTS

 

 

 

 

 

 TIMBER PRIMER

 

LINSEED OIL BASED PRIMER FOR OLD TIMBER OLD AND NEW

 

APPROXIMATELY 24 HOURS DRYING TIME DEPENDING ON HUMIDITY AND VENTILATION

 

AVAILABLE IN 500ML, 2,  4, AND 10 LITRE CANS

 

CAN BE OVERCOATED WITH WATER BASED PAINTS

 

DEPENDING ON CONDITION OF TIMBER COVERAGE IS 6-12 SQUARE METRES PER LITRE.

 

APPLICATION BY BRUSH, ROLLER, OR SPRAY

 

IF SPRAYING, THINNING WITH TURPS MAY BE NECESSARY

 

ON ROUGH TIMBER BRUSHING IS THE BEST METHOD OF APPLICATION

 

WASHES UP IN MINERAL TURPS

 

DOES NOT CONTAIN  ANY LEAD OR MERCURY BASED PRODUCTS


 

 

 

 

 

 GREY & RED OXIDE ZINC CHROMATE PRIMER

 

THIS PRODUCT WILL PREVENT RUSTING FOR  OVER 5 YEARS WITHOUT TOP COATING.


CAN BE USED IN MARINE AND CONSTRUCTION APPLICATION


SPECIALLY  FORMULATED WITH ANTI CORROSIVE PROPERTIES FOR PREVENTING RUST ON BARE STEEL.

 

STEEL MUST BE CLEANED,  FREE  FROM OILS, AND ALL SURFACE RUST REMOVED BEFORE APPLICATION.

 

APPLICATION BY BRUSH,  ROLLER, OR SPRAY.

 

IF SPRAYING, THINNING WITH TURPS MAY BE NECESSARY.

 

WASHES UP IN MINERAL TURPS

 

DRYING TIME IS 2-6 HOURS DEPENDING ON WEATHER CONDITIONS.

 

COVERAGE IS 6-12 SQUARE METRES PER LITRE.

 

MINERAL SOLVENT BASED TOP COATS ARE RECOMMENDED.

 

DOES NOT CONTAIN  ANY LEAD OR MERCURY BASED PRODUCTS.

 

AVAILABLE IN 500ML 1 AND 4 LITRE CANS AND 200 LITRE DRUMS

 

 




 

 

MARINE PLYWOOD & TIMBER SEALER

 

  

 

SPECIALLY  FORMULATED FOR MARINE STANDARD APPLICATIONS.

EXCELANT GLOSS HOLD OUT, SANDE EASILY, HIGH FILLING

SURFACE MUST BE CLEAN,  FREE  FROM OILS, AND ALL LOOSE PARTICLES REMOVED BEFORE APPLICATION.

 

APPLICATION BY BRUSH,  ROLLER, OR SPRAY.

 

IF SPRAYING, THINNING WITH TURPS MAY BE NECESSARY.

 

WASHES UP IN MINERAL TURPS

 

DRYING TIME IS 4-6 HOURS DEPENDING ON WEATHER CONDITIONS.

 

COVERAGE IS 6-12 SQUARE METRES PER LITRE.

 

CAN BE OVER COATED WITH WATER BASED OR SOLVENT BASED TOP COATS

 

DOES NOT CONTAIN  ANY LEAD OR MERCURY BASED PRODUCTS.

 

AVAILABLE IN 1 AND 4 LITRE CANS